STAHLWILLE PRODUCTS

Product Details:

Product Details:

Product Details:

Product Details:

• tactile and acoustic trigger signal 1
• mount for interchangeable insert tools
• QuickRelease safety lock
• fast setting using convenient keypad
• automatic compensation to achieve correct tightening torque even if a changed extension is entered
• overload protection by means of acoustic and visual signals
• automatic keypad lock prevents inadvertent changes
• angle-controlled measurements using Angle Module No 7395-1 (refer to page 201) 1
• display also works for anticlockwise torque
• units of measurement: N·m, ft·lb, in·lb
• different tolerance limits can be set for each joint
• visual red and green signals in the display confirm the status of the joint
• additional security for presets (function mode, trigger or preset value, unit of measurement, tolerance, save, deviating extension) using PIN code
• up to 7.500 measurements can be stored
• USB interface
• automatic notification of the next calibration date
• calibration using perfectControl calibrating unit No 7794 or calibration system No 7791
• two-component handle with ergonomically designed green softer layers (resistant to oils, grease, fuels, brake fluids and Skydrol) with certificate
• in sturdy plastic case (sizes 40-100 in steel case)
• patent
• supplied with two1.5 V AA batteries. AA/LR6,1.2 V  rechargeable cells may also be used
• display deviation value ± 2%, ± 1 digit

Product Details:

Product Details:

Product Details:

• click-type
• mount for interchangeable insert tools
• QuickRelease safety lock
• fast, accurate setting thanks to QuickSelect quick-action adjuster
• dual stop signaL
• easy-to-read double scale with colour coding to differentiate between N·m/ft·lb and ft·lb/in·lb scales
• the measuring element is only under load while force is being applied, no need for manual reset to zero
• can be applied for either clockwise or anticlockwise tightening by turning the inserts over
• any force applied to the tool after the 'click' or
• applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it.
• two-component handle with ergonomically designed green softer layers (resistant to oils, grease, fuels, brake fluids and Skydrol)
• calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly.
• with certificate
• registered design
• display deviation value ± 3%

Product Details:

Product Details:

• indicating type
• the measuring element is a torsional leaf spring
• clockwise tightening (with trailing pointer) and anticlockwise tightening
• with 1/4" internal hex drive (F 6.3 DIN 3126)
• comparative scale in in·lb and cursor
• inserts and adaptors with external hex E 6.3 (1/4") DIN 3126/ISO 1173 are securely held and firmly controlled in the mounting shaft (for BITS screwdriver inserts, refer to page 171).
• to attach 1/4" sockets, please order adaptor No 3115 (refer to page 170)
• with certificate
• display deviation value ± 4%

Product Details:

• 1 For Torque-controlled Bolt Tightening In The Cn·mAnd In·lb Ranges
• 1 For One-off Or Production Runs
• 1 Anticlockwise And Clockwise Tightening
• 1 With 1/4" Internal Hex Drive
• (F 6.3 Din 3126/iso1173)
• 1 Infinitely Variable Via Micrometer Scale(Twist Scale)
• 1 Disengaging Clutch Coupling Prevents The PresetValue Being Exceeded
• 1 The Shape Of The Handle And Its Surface TextureEnsure Safe And Accurate Transmission Of Torque

Product Details:

Product Details:

Product Details:

• Durable
• Consistency
• Optimum quality

Product Details:

Open head ratchets inserts are ideal for tightening of tube nut , cap nuts on brake pipes, oil pressure lines or control lines etc. The clamping jaws are folded over the nut. Linear moveability of the jaws enables ratchet function.

Open end ratchet tube joint torque wrench attachment heads with the same centre line may be interchanged among themselves arbitrarily, without needing the torque wrench to be adjusted again. when interchanging heads with differing centre lines, the torque wrench must be individually adjusted in each case.

Jala Sales – torque solutions, suppliers of Open end ratchet Interchangeable head insert in Pune for torqueing of tube nut , cap nuts on brake pipes, oil pressure lines or control lines etc

Product Details:

• In comparison with the 90, 95 and 95VA models, this model offers 100% more drawer volume.
• 1 6 easily removable drawers mounted in full extension rails with bearing cage guidance.
• 1 Three-stage safety logic:
• Central locking with a cylinder lock and fold-down key.
• Individual locks prevent inadvertent opening in transit.
• Topple-proof – it is not possible to pull out more than one drawer at a time.
• 1 Drawers can be identified with multiple stickers per drawer (sheet of stickers included in delivery).
• 1 Stainless steel handle with reinforced connection to body.
• 1 Impact protection strips with wrap-around bumper.
• 1 Wear and scratch-resistant worktop and ribbed protective base strip in stainless steel.
• 1 Oil and acid resistant ball-bearing mounted low-friction wheels (O 125 mm) with carpet protection to prevent ingress of dirt and fibres into bearings, with two parking brakes.
• 1 Paper-roll holder.
• 1 5 Standard colour shades, drawers in two colours (silver with black full-width handle).
• 1 Perforations from both sides for Hooks No 8031-8041, e.g. for larger tools.
• 1 Can be enhanced with STAHLWILLE Standard and TCS inlays(see pages 42–71)

Product Details:

• 8 easily removable drawers mounted in full extension rails with bearing cage guidance.
• 1 Three-stage safety logic:
• Central locking with a cylinder lock and fold-down key.
• Individual locks prevent inadvertent opening in transit.
• Topple-proof – it is not possible to pull out more than one drawer at a time.
• 1 Drawers can be identified with multiple stickers per drawer (sheet of stickers included in delivery).
• 1 Stainless steel handle with reinforced connection to body.
• 1 Impact protection strips with wrap-around bumper.
• 1 Wear and scratch-resistant worktop and ribbed protective base strip in stainless steel.
• 1 Oil and acid resistant wheels (O 125 mm) with carpet protection to prevent ingress of dirt and fibres into bearings, with two parking brakes.
• 1 Paper-roll holder.
• 1 5 Standard colour shades, drawers in two colours (silver with black full-width handle).
• 1 Perforations from both sides for Hooks No 8031-8041, e.g. for larger tools.
• 1 Can be enhanced with Stahlwille Standard and TCS inlays (see pages 42–71).

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

• 1 Robust: The Integrated Visual And Audible Overload Protection MechanismEnsures The Durability Customers Expect Of Stahlwille.
• 1 Accurate: The Display Deviation Value Of A Mere ± 1% Guarantees TheGreatest Possible Measuring Dependability. With Certificate.
• 1 Ready For Work: Thanks To The Integrated Transducer With A Broad Measuring Range, Work Can Start Immediately.
• 1 Flexible: Smartcheck Can Be Positioned Almost Anywhere. Whether Horizontally Or Vertically – The Well-thought-out FixingPoints, The Compact Construction And Rotatable Display Make It Easy To Use.
• 1Versatile: Three Operating Modes (Track, First Peak, Peak Hold) And Three Measuring Units (N·m, Ft·lb, In·lb) Can Be Selected.The Target Torque And Tolerances Can Be Individually Set To Evaluate The Readings.
• 1Mobile: Ideal For Use On The Road If There Are No Power Sockets Available. Besides The Usual Operating Mode Using A MainsAdapter, This Unit Can Be Run On Batteries (4 X Aaa Or 1 X 9 V Block, Adapter Included).
• 1Rotatable: Smartcheck Can Easily Be Adjusted To Suit The User’s Angle Of Sight. Not Only The Display But Also The Display MountAnd Base Body Can Be Rotated Through 180°.
• 1Intuitive Operation: The Unit Is Easy To Use And Has Operator Guidance To Aid Fast Working, Reliable Results Coupled With HighLevels Of Safety.
• 1Resilient: The Display And Keypad Are Splash-proof, And The Housing Is Made Of Impact-resistant Plastic. Safe Transport AndStorage Is Ensured By The Sturdy Transport Box.
• 1For Many Torque Ranges: Smartcheck Is Available For These Standard Torque Ranges: 1–10 N·m, 10–100 N·m, 40–400 N·mAnd 80–800 N·m.
• 1For Starters: Stahlwille Will Soon Be Expanding The Torque Tester Family Of Products.The Focus Will Always Be On Versatility, Performance And Ease Of Use. Smart? Checked!

Product Details:

Product Details:

Product Details:

Product Details:

• Particularly Compact Construction
• 1 Light And Easy To Handle
• 1 With Ratchet Function
• 1 Working Angle 8°
• 1 With Rotary Scale
• 1 For Use With A Torque Wrench With A Fixed 1/2" Square Drive
• 1 Patents Applied For
• 1 In Carry-case
• 1 Included In The Set: 3 Hexagon Inserts Sizes 30; 32;
• 36 Mm,
• 1 Insert With 1" Outer Square Drive,
• 1 Reaction Arm 400 Mm
• 1 Display Deviation Value ± 5%

Product Details:

Product Details:

Product Details: